How is everyone powering the HO track. I have tried regular dc power packs.
I have tried a wall wart putting out 17v but only get .01v at the engine. Can someone
throw some pointers my way.
top of page
Simplify ••• WiFi ••• LocoFi™
FREE SHIPPING ALWAYS AVAILABLE! Domestic: MINIMUM $250 OR International: MINIMUM $400 PURCHASE REQUIRED.
!!! The new estimated ship date for LocoFi 3 is now February 2025 !!!
bottom of page
I am using an ancient North Coast Engineering (NCE) DCC SB3A system which supports transitional DCC and LocoFi together on the same layout. The power supply for this is
Hope that helps. This works and will support running at the same time at least 2 LocoFi controlled units with pre=DCC motors and one DCC controlled unit through an NCE ProCab/SB3A DCC controller.