I have tried to add a test bed locomotive three times and gotten the error message Adding Locomotive Failed. No further explanation as to why it failed. Version is 2.36(20) . I have verified local wifi channel is 2.5 mhz.
This is not the first locomotive installed on this Galaxy S8. It is a test bed with the orange grey leads connected to a stand alone motor.
Hello Ken,
Make sure that you're first connected to the network you want the loco to add to.
'Forget' the loco from Android wireless settings as shown below and then try adding the loco again.
Let us know if that helps.
-LocoFi Team