I came across a reference to Cleqan Power supply on installation guide that refers to the FAQ but cannot find anything on the FAQ page on the subject. Any ideas?
Thanks
Ananda
5 comments
Like
5 Comments
Commenting on this post isn't available anymore. Contact the site owner for more info.
Once you install the module, the motor will get the PWM signal from the module. The PWM power supply can be used provided it is set to full but then at full it should not exceed 24V.
There is indeed a bridge rectifier onboard which makes it polarity agnostic. The polarities are shown to make it easier to understand and comply with NMRA color coding standards where red indicates + power from the right rail even though it doesn't really matter for LocoFi.
You're very welcome! Great to hear that helped. In case of further questions, please feel free to contact us via e-mail, by replying here or starting a new thread.
Yes. That is correct!
Once you install the module, the motor will get the PWM signal from the module. The PWM power supply can be used provided it is set to full but then at full it should not exceed 24V.
There is indeed a bridge rectifier onboard which makes it polarity agnostic. The polarities are shown to make it easier to understand and comply with NMRA color coding standards where red indicates + power from the right rail even though it doesn't really matter for LocoFi.